Winco DR250F4
The FPT C87 TE1D is an 8.7 liter, in-line six-cylinder, four-stroke diesel engine for generator applications, with direct electronic unit injection, a Bosch EDC7 UC31 engine control unit and turbocharging with air-to-air aftercooling. At 1800 rpm it is rated 280 kWm net stand-by power (290 kWm gross), and at 1500 rpm 256.2 kWm net stand-by (263 kWm gross). It has a 24 V electrical system with a Denso 4.5 kW starter and 90 A alternator, a dry-type air filter, and a 600-hour servicing interval. Dry weight including the cooling package is about 1,050 kg.
Voltage configurations
| Pick | Voltage | kW | kVA | Amps |
|---|---|---|---|---|
| 120/240 V 1-ph | 225 | – | – | |
| 208/240 V 3-ph | 250 | – | – |
Factory-set to the voltage you order.
- Rating
- 225 kW
- Voltage
- 120/240 V 1-ph
- Fuel
- Diesel
Output at your site
About 225 kW of 225 kW rated · no derate here
From the manufacturer's derate: 3% per 1,640 ft above 3,281 ft; 3% per 9 °F above 104 °F. An estimate; we confirm sizing with you before you buy.
How long it runs
- DieselUses 10.25 gal/hr at 50% load.
From the manufacturer's fuel-use figures; between the loads it lists we estimate in a straight line. Real runtime depends on the load, the weather and the engine's condition.
Optional accessories
- Winco battery, Group 4D 1050 CCA · 80765-008 · $340
- Winco NFPA 110 Level 1 upgrade · 352030-1 · $2,600
- Winco generator strip heater · 300507 · $410
- Winco DSE8610 digital controller · $6,250